Benchmark BV1010-TST BenchMixer

In stock
SKU: BV1010-TST
Regular price $2,948.58
Regular price -15% $3,468.92 Sale price $2,948.58
BenchMixer XLQ QuEChERS Shaker/Vortexer
with racks for 7x50ml tubes held
horizontally, 50x15ml and 50x1.5/2.0ml tubes held vertically

Benchmark’s BenchMixer XLQ has been designed for use in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications.

Multiple samples can be processed simultaneously in the Benchmixer XLQ’s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches.

The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisley controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor.

Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours.

While the BenchMixer XLQ is configured primarily for QuEChERS protocols, additional racks are available to accommodate nearly any type of vessel commonly found in the laboratory (ask for details). Built for heavy-duty use, the instrument carries a 2 year warranty.

brand Benchmark
dimensions 12 x 7 in. / 30 x 17.8 cm
electrical-safety-mark 100 to 240V, 50-60 Hz
lead-time 3
list-price 3468.92
manufacturer-part-number BV1010-TST
model BV1010-TST
Spec Sheet BV1010-TST_Spec_Sheet.pdf
warranty-covering-parts-and 2 Years

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unused, and in its original packaging.

Free Ground shipping is for all online orders over $500 and is inside of the contiguous United States (excluding Hawaii and Alaska).

Free Ground shipping does not apply for demo/used/refurbished/clearance units and any order over 100 lbs of actual or dimensional weight (other exclusions also applies).